CHA2 with fir tree, Article number: 150-09010

• Easy to install without the need for a tool

• Horizontal length tolerance compensation

• Ideal if holes do not fit registration or bundles need to be routed around corners

There are various types of TapeClip available for winding cables and cable looms. The cables to be wound are easily fixed to the winder bar with cable ties or adhesive tape.

The really special thing about the CHA series is its horizontal length tolerance compensation. This is of benefit if holes cannot be drilled to fit perfectly or the cable bundle has to be routed around corners.

The use of the TCSFT6.5S-CHA-MD with seal is recommended if drill holes need to be protected against water ingress. Bases in a variety of shapes and sizes are available for all manner of metal thicknesses and drill hole diameters tailored to meet precise application requirements.

Bundling clips are designed to provide simple and easy methods of securing cable bundles, hoses, or pipes. They are fastened onto the tape bar using tape or cable ties. The different fixing orientations allow tape clips to be used with a wide range of panel thicknesses and hole diameters. Standard bundling clips are available as well as standoff and stud mount versions.

Specifications:

• Material: Polyamide 6.6 (PA66)

• Flammability: UL94 V2

• Operating Temperature °C: -40°C to +85°C (+105°C, 500 h)

*Packs are weighed before sending so quantity may fluctuate slightly

*Packs are sold from a minimum of 25 pieces.