Professional Polystyrene Hot Wire Foam Cutter HILLCUTTER-PRO (230V) 1,350 x 450mm length - Insulation Cutter
Hot wire foam cutter for professional insulation and thermal insulation work. Highest quality and precise cutting with the option off slanted, corner and rafter cuts. Low weight and high stability in one device. This is a lightweight cutter with supreme stability and a multitude of possible cutting variants.
-
Measuring table ensures accurate vertical cuts
-
Table set up also allows accurate angled cuts
-
Defined depth of cut can be set, to ensure accurate cut out of blocks
Cut Length: 1,350mm
Cut Depth: 450mm
Need a cutter with a shallower cut depth? - Take a look at the HILLCUTTER PRO 330mm
Hire Me Form
HILLCUTTER-PRO-450 - Highest quality and precise cutting - Slanted, corner and rafter cuts - 450mm Cut Depth
Low weight and high stability in one device. This is an extremely light weighted cutter. Despite its low weight, it convinces by its supreme stability and a multitude of possible cutting variants.
The additional corner cutter allows a fast and precise cutting of rafters. After the successful cut, just fold the corner cutter back, to continue the work with the main strap. PLEASE NOTE: The Corner / Rafter cutter is not included, sold separately.
Comes with tool bag which includes: Tape measure and Marker Pen. The tool bag comes with Hook and Loop fastening so that you can secure it to the unit or on a wall/work surface. Also supplied with a Scaffolding Bracket.
Stand base: This Cutter is extremely lean and provides a very safe stand - due to a clever stand base system. The stand base is not just height adjustable - but also adjustable in width.
Side placement and support arm: Designed to achieve a maximum of stability at minimum weight.
Cutting of wedges: The integrated slanted cutting device is a special feature of this HILLCUTTER. This cutting device can easily be adjusted to the different angles of inclination, to perform e.g. cuts for platform roofs with the corresponding inclination.
Transformer: The transformer is already assembled on the device and the non-plasticized foam cutter is ready for action immediately.
-
Cut length: 1,350mm
-
Cut depth: 450mm
-
Slab support surface: 1,000mm
-
Side placement surfaces: 400mm
-
Frame: Welded and powder-coated aluminium
-
Bow: Powder-coated aluminium with ball-bearing supported guide
-
Bow adjustment range: 0-90°
-
Weight: 14 kg
-
Transformer power with thermo-protection: 220-230V / 50-60 Hz / 37 V, 160 VA / IP 68
| Quick Search Code | 103811 |
|---|
HILLCUTTER-PRO-450 - Highest quality and precise cutting - Slanted, corner and rafter cuts - 450mm Cut Depth
Low weight and high stability in one device. This is an extremely light weighted cutter. Despite its low weight, it convinces by its supreme stability and a multitude of possible cutting variants.
The additional corner cutter allows a fast and precise cutting of rafters. After the successful cut, just fold the corner cutter back, to continue the work with the main strap. PLEASE NOTE: The Corner / Rafter cutter is not included, sold separately.
Comes with tool bag which includes: Tape measure and Marker Pen. The tool bag comes with Hook and Loop fastening so that you can secure it to the unit or on a wall/work surface. Also supplied with a Scaffolding Bracket.
Stand base: This Cutter is extremely lean and provides a very safe stand - due to a clever stand base system. The stand base is not just height adjustable - but also adjustable in width.
Side placement and support arm: Designed to achieve a maximum of stability at minimum weight.
Cutting of wedges: The integrated slanted cutting device is a special feature of this HILLCUTTER. This cutting device can easily be adjusted to the different angles of inclination, to perform e.g. cuts for platform roofs with the corresponding inclination.
Transformer: The transformer is already assembled on the device and the non-plasticized foam cutter is ready for action immediately.
-
Cut length: 1,350mm
-
Cut depth: 450mm
-
Slab support surface: 1,000mm
-
Side placement surfaces: 400mm
-
Frame: Welded and powder-coated aluminium
-
Bow: Powder-coated aluminium with ball-bearing supported guide
-
Bow adjustment range: 0-90°
-
Weight: 14 kg
-
Transformer power with thermo-protection: 220-230V / 50-60 Hz / 37 V, 160 VA / IP 68
Customers Also Bought
You might also like
Automatic Hot Knife Cutting Machine / System
Our Price:
Hand Held Hot Wire Bow Foam Cutter 1,370mm length KD-11-1370 - 230V
Our Price:
Cordless Air Cooling Hot Knife Rope Cutter KD-DC100R
Our Price:
HC300 Hand Held Hot Knife / Wire Foam Cutter with Heavy Duty Case
Our Price: